ansys中完成预应力的几种方法(国外英文资料).docVIP

ansys中实现预应力的几种方法(国外英文资料) It is well known that in ANSYS, prestressed concrete analysis (with bonding) can be applied with the equivalent load method and the real body method. The so-called equivalent load method is the effect of the force reinforcement on the concrete structure; The so-called real strength reinforcement method is to use solid to simulate concrete, and link simulates the force. The advantages and disadvantages of the equivalent load method The advantage is that it is simple to model, without considering the specific location of the reinforcement, which can be modeled directly, and the grid is simple. The overall effect of the structure under prestress is easy to obtain. The main drawback is: (1) the equivalent load method does not consider the effect of reinforcement of concrete distribution and the direction, the force effect on concrete obviously in every place is different, the equivalent load law cannot be considered; The horizontal component is not considered. (2) to some linear force simulation difficulties, such as usually adopted is linear (short) + + curve lines (long) + + curve line (short), equivalent to trouble, this form of distributed and may not be reasonable. It is difficult to find the force of the structural detail, otherwise the load must be applied in the position of the reinforcement, and this is lost in the convenience of modeling. The combined effect of the external load is difficult to consider, and cannot determine the stress increment under the external load. There is no analog to the tension. There is no such thing as the stress caused by stress loss. One of its biggest drawbacks is: thicker! According to the netizen communication, the result that obtains and the actual situation error is bigger! The difference between the result and the actual error is more (probably the exception), so this approach requires caution and validation. The advantages and disadvantages of the method of physical strength By dividing the concret