北航《工程资料》在线功课一(国外英文资料).docVIP

北航《工程材料》在线作业一(国外英文资料) Beihang engineering materials online homework one Exam time: 100 test time: Single topic selection True or false Multiple choice (10 questions in total, 40 points.) When the parts are carburized, it is usually necessary to pass through () to reach the high surface hardness and the purpose of wear-resisting. A. harden and cool down B. normalizing C. conditioning Quench + heat return Full marks: 4 The low-molecular compound used to synthesize polymers is called (). A. link B. segment C. monomer D. polymer Full marks: 4 What kind of steel, such as 3.65, 65Mn, and 50CrV, is characterized by heat treatment (). A. tool steel, quench + cold tempering B. bearing steel, carburizing + quenching + low temperature tempering C. spring steel, quench + heat return D. adjust the steel, harden and heat back Full marks: 4 The main factor when selecting the shaft parts is (). The intensity of A. Impact toughness Fatigue strength D. Surface abrasion resistance Full marks: 4 Process hardening (). A. strength increases, plastic decreases The strength increases and the plasticity increases C. The strength is reduced and the plastic increases D. The strength is reduced and the plastic is reduced Full marks: 4 6. Eutectoid steel supercooled austenite in the temperature range of 350 ℃ - Ms isothermal transformation, the organization is formed by (). A. sorbite Lower bainite Upper bainian body D. pearlite Full marks: 4 The return of steel is generally followed by (). A. annealing B. normalizing C. quenching D. carburizing Full marks: 4 The shape of the martensitic body depends on (). A: the carbon in steel The content of the alloy elements in steel Quench the cooling speed D. austenites carbon score Full marks: 4 Common stainless steel is ferrite stainless steel, austenitic stainless steel, martensitic stainless steel and (). A. austenitic stainless steel B. marten-austenitic stainless steel C. Leite stainless steel D. bells stainless steel Full marks: 4 The amount of c