特高压直流换流变压器的研制_张燕秉.pdfVIP

DOI :10.13336/j.1003 -6520.hve.2010.01.017 　36 1 　2010 1 31 　　　　　 High Voltage Engineering, Vol.36, No.1, J an.31, 2010 255 1 1 2 3 张燕秉, 郑　劲, 汪德华, 李文平 (1.国家电网公司直流建设分公司, 北京100052;2.西安西电变压器有限 任公司, 西安710077; 3.保定天威保变电器股份有限公司,保定071051) 　:-, 、、。 , 、。、, , , , ; , , , , 。 :;;;;; :T M72 1.1 :A :1003-6520 (2010)01-0255-10 Development of UHVDCConverter Transformer 1 1 2 3 ZHANG Yan-bing , ZHENG Jin , WANG De-hua , LI Wen-ping (1.State Grid DC Proje t Constru tion Bran h Company, Beijing 100052, China;2.Xian XD Transformer Co., Ltd., Xian 710077, China;3.Baoding Tianwei Baobian Ele tri Co., Ltd., Baoding 071051, China) Abstract:The basi stru ture for onverter transformers of Xiangjiaba-Shanghai proje t is single-phase, double- winding, on-load tap hanger and oil-immersed.Compared with onverter transformers in ±500 kV HV DC pro- je ts, withstand voltages of valve windings are higher.It is diffi ult to sele t insulation material to regulate the DC and AC voltage distribution.Furthermore, the oordination between insulation st ru ture, the reasonable ele tri field strength on the interfa es of oil and insulation pressboards and t ransportation limits shall be more important in the design of onverter transf ormer.A s for the barrel system arrangement of valve windings, it is related to the transportation limits and assembly w ork on site.The internal barrel sy stem stru ture of valve w indings for onverter transformers of Xiangjiaba-Shanghai proje t is sele ted.The DC bias urrent ontrol also is ru ial in onverter transformers design.In Xiangjiaba-Shanghai proje t, the requirement for DC