特高压输电线路钢管塔管——插板节点受弯性能.pdf

学兔兔 第31卷第2期 土 木 建 筑 与环 境 工 程 J ournal of Civil．Architectural Environmental Engineering Vo1．31 No．2 2009年 4月 Apr．2009 特高压输电线路钢管塔管一插板节点受弯性能 李正良 ，韩 枫 ，白 强 ，李茂华 (1．重庆大学 土木工程学院，重庆 400045；2．中国电力科学研究院，北京 1OO192) 摘 要：根据1／4环、半圆环和全圆环节点形式的试验研究和有限元分析初步探索了钢管插板节点 受弯的力学性能，并提出了这种节点的承载力确定方法及简便计算公式，在与日本《输电线路钢管 塔制作基准》对比分析中，得出了承载力和不同参数的关系曲线。结果表明：极限承载力不仅与主 管壁厚t、管径D、节点板长度B、现时状态下屈服区域内中截面项部挠度6有关，更重要的是还和现 时状态下的加劲肋有密切相关。承载力计算公式对工程设计有重要的应用价值。 关键词：钢管插板节点；钢管塔；极限承载力；足尺模型试验；数值模拟；节点形式 中图分类号：TU391 文献标志码：A 文章编号：1674—4764(2009)02—0018—05 Bending Performance of Tube—Gusset Joint in Steel Tubular Tower for Extra。_High_-Voltage Transmission Line LI Zheng—Liang ，HA『＼『Feng ，BAI Qiang ，LI Mao—Hua ’。 (1．College of Civil Engineering，Chongqing University，Chongqing 400045，China；2．China Electric Power Research Institute， Beijing 100192，China) Abstract：This paper explored bending performance of tube—gusset joint primarily according to experiment and finite element mode1．The method which iS used to determine ultimate strength of the ioint was proposed on the base of three joint types including 1／4 circle ribbed，half circle ribbed and circle ribbed stiffeners．Compared with the Japanese electricity transmitting steel tubular tower manufacture norm，a conclusion has been drawn that the ultimate strength has relationship with several different parameters． The result shows that the ultimate strength of the joint is related not only to the wall thickness t，diameter D。length of gusset plate B and the yield deflection 6 at the top of the relevant section under the current