IEC62059标准在智能电能表可靠性预计与考核验证方法上的应用_英文_.pdf

Research Exploration IEC 62059 Standards’ Application in Reliability Prediction and Verification of Smart Meters By Li Xiangfeng and Zong Jianhua Abstract: This article introduces the current situation of the smart meter’s reliability and the failure mechanisms at fi rst, and then describes the relationship of meter reliability characteristics combined with its Bathtub Curve. It also introduces both the feasible failure tree model for meter lifecycle prediction based on actual experiences and meter reliability prediction methodology by SN 29500 norms based on this model. This article also brings forward that it is necessary that the “Learning Factor” shall be adopted in meter reliability prediction for new materials, new process, and customized parts by referring to GJB/Z299C. Thereafter, this article also tries to apply IEC 62059 and JB/T 50070 to introduce the feasible method for the lifecycle prediction result verifi cation by accelerated lifecycle test. Furthermore, the article also explores ways to increase the fi rmware reliability in smart meter. Key Words: Smart meter, reliability prediction, accelerated lifetime test, truncate sequential trial method for reliability test 1. Introduction of meters have been installed in field. / Mil_STD_883F/TR-332 / SN29500 / Although both SGCC and suppliers IEEE1413 / RDF2000, etc.) to establish an Si n c e t h e U. S . m a d e E n e r g y paid special attention to the quality and evaluation standard suitable for our own Independence and Security Act in 2007, reliability, more than 5% of installed industry. major economies in the world successively meters have to update their firmware or put forward their plan for smart grid to be replaced with new meters, especiall