综合布线系统计算方法(国外英文资料).docVIP

综合布线系统计算方法(国外英文资料) Integrated wiring system design method: Understand the function of the building according to the owner (user The requirements of the integrated wiring system are determined Integrated wiring system configuration. Each intelligent system is involved in the building (communication network system, computer System, building equipment automation system and other weak electrical subsystems Transmission rate, bandwidth, The level of the integrated wiring system is selected for the interface and other requirements (e.g., Class c, D, E, F or light cable ). 2 the workspace design office (write The service area of building work area can be divided into three types according to office requirement. The first type is the area of a workspace where the users terminal is more dense 5 ~ 6 m2 An estimate. The second type is the usual users office area The service area can be 7 ~ 8 m2 An estimate. The third type is a more spacious office The area of service is available 9 ~ 10 m2 An estimate. Service area of apartment and residential area The domain can press room (study, living room, bedroom etc ) divide every room A workspace estimate The area of service area of a department store can be pressed 50 m2 , estimate. Various other classes Type buildings are determined by the users nature and function. The pre-condition for the design of the wiring subsystem 3.1.1 type requirements for the latest and forward end equipment according to the project; The number and location of the information sockets required for each layer. 3.1.3 one-off investment in comparison with the project construction plan; 3.1.4 from The cable between FD and the information socket Horizontal cable and optical cable The length should not be greater than 90m requirements determine the location of each layer of weak current. Free learning url: At / The calculation of the number of information outlets According to the plan of building project, the total area of the work area of each layer (area) is ca