主板的主要部件(国外英文资料).docVIP

主板的主要部件(国外英文资料) Main parts of the motherboard Depending on the structure and type of the motherboard, the types of parts on the motherboard are different. But the main parts are the same. Specifically, the main parts of the motherboard are: A CPU socket. CPU socket according to different main CPU in the form of encapsulation is divided into four kinds, one kind is Socket7 outlet, at all levels of the Pentium CPU usage, on the motherboard is a nearly square white flat outlet, the side with a metal handle, will hand up, can let the CPU free into the socket, and then press the handle, the CPU can be clamped on the socket; Socket370, which is used by the Pentium III CPU for Celeron and Socket370 structures, looks exactly the same as the Socket7, except for a full circle; Slot1, this is the socket of the Pentium II/Pentium III, which looks like a long, narrow slot where the CPU is inserted into the slot like a plug-in card, with CPU positioning and clamping device on both sides of the slot; SlotA, the AMD K7 slot, looks the same as Slot1, except that the pins are completely different and the location of the slot is different. Memory slot. Now the motherboard memory slots are generally the memory of 168 line slot, splice for SDRAM memory module, the data width of each slot for 64, therefore, for now the CPU, only need one can restart the computer. Mainboard memory slots typically have 2-4 roots, with the maximum memory capacity of 256m-2g. The card expansion slot. The card expansion slot is used to plug all kinds of CARDS, such as graphics CARDS, sound CARDS, Modem CARDS and network CARDS. The card slot is currently in use with PCI, ISA, and AGP. PCI slot is used for PCI bus card, in the main board is usually white slot, according to the main board, there are two or five PCI slots. The history of the ISA slot is very old, as it was in the 286 era, but because of the number of CARDS based on ISA, it has not yet been completely eliminated. The ISA slot is usually black, wi