矿浆浓度计(国外英文资料).docVIP

矿浆浓度计(国外英文资料) The concentration of the pulp concentration of the pulp is measured by ultrasonic attenuation to measure the concentration of the medium such as pulp or sludge in the sediment tank or in the pipeline. It can monitor the variation of the concentration of the medium in real time, and can also direct process control by setting the trigger value of the output relay. This product has been successfully applied to various fields such as water plant, municipal sewage plant, industrial pulp and steel mill pulp. Introduction of the principle For pulp density monitoring research for many years proved that the ultrasonic attenuation in pulp and suspended solids and liquids in the pulp and the concentration of suspended solids, according to the principle of the USD for ultrasonic slurry concentration meter to realize the online measurement and monitoring of sludge and suspended matter concentration. It can continuously monitor the changes in the concentration of pulp and suspension and automatically implement the process control. The application field is to return the sludge, the initial sink, the sink, the concentration pool, the sludge dehydration, etc. The concentration of coal mine, mine, paper, electric pulp concentration, coal mud concentration, mortar concentration, pulp density and so on. Ultrasonic densimeter application in pulp density measurement Common concentration meter are: ray concentration meter, ultrasonic densimeter, photoelectric concentration meter, differential pressure densimeter and weighing method, etc. The disadvantages of the type principle Ray densimeter rays of a certain intensity through the material under test, its strength is reduced, less depends on the measurement channel and the concentration of the object under test, if the measurement channel is set, then by measuring the radiation is the degree of attenuation of the object under test, you can get the concentration of the object under test source of environmental and safety con