空冷系统在伊拉克一电厂中的设计应用(国外英文资料).docVIP

空冷系统在伊拉克一电厂中的设计应用(国外英文资料) Air cooling systems design applications in a power plant in Iraq Mr Liu is the man who has the steel Abstract: combined with the air cooling system design application in power plant, points out the industrial enterprises to save water, the rational use of water resources, the development direction of protecting the natural environment, etc.  keywords: empty cold damp dry wet dry bulb temperature wet bulb temperature of the cooling tower power plant cooling tower Engineering overview and climate characteristics  Iraq MULLA ABDULLAH power plant is located in northern Iraq MULLA ABDULLAH, the region of the gobi desert, as the typical climate characteristic in the Middle East, the highest environmental temperature is 50 ℃, the lowest is 0 ℃, annual rainfall, relative humidity is 20% ~ 20%, water is very precious resource in the local.  power plant capacity is 6 x 38 mw coal-fired units. The hydraulic parts of the power plant are designed in China. In order to meet the cooling water required by the main engine, the water supply must cool down to 1770m3 / h and each coal unit is 295m3 / h.  water consumption in large power plant, the application of the cooling tower circulating water system is very necessary, because it can not only save water, to reduce the cost, but also on environmental protection and water resources reasonable application is of great significance, so the cooling water system design for the single water supply system.  Air cooling principle and characteristics  water cooling process is through the evaporation cooling and the conduction of heat dissipation, the temperature decreases. A cooling tower is a device that USES air and water to cool water. According to the circulating water system in the circulating water, direct contact with air is the cooling tower can be divided into three types: open (wet), closed (dry) and hybrid dry (wet). A wet cooling tower is an open circulating water supply system that involves direct