外面粗拙度与加工方法(国外英文资料).docVIP

表面粗糙度与加工方法(国外英文资料) Surface roughness and machining method Surface roughness is chosen The serial number = 1 The Ra value is not greater than \ mu m = 100 Surface condition = visible knife mark Processing method = rough car, boring, plane, drill For example = rough surface, such as rough car, rough plane, cutting, etc., the surface of such as rough boring tool and rough grinding wheel is seldom used The serial number = 2 The Ra value is not greater than \ mu m = 25 and 50 Surface condition = visible knife mark Processing method = rough car, boring, plane, drill Apply examples = rough surface, weld before welding, rough borehole wall, etc The serial number = 3 The Ra value is not greater than \ mu m = 12.5 Surface condition = visible knife mark Process = rough car, plane, milling and drilling The application example = common non-bonding surface, such as the end of the shaft, the reverse Angle, the gear and the side of the pulley, the non-work surface of the keyway, the weight loss of the hole surface The serial number = 4 The Ra value is not greater than \ mu m = 6.3 Surface condition = visible machining trace Processing method = car, boring, cutting, drilling, milling, filing, grinding, coarse reamer, milling teeth Application example = non-essential parts, such as pillar, bracket, shell, liner, shaft, cover, etc. The surface of the fasteners free surface, the fasteners fastenings, the non-centering surface of the external spline, not as the surface of the cogging ring of the measuring reference The serial number = 5 The Ra value is not greater than \ mu m = 3.2 Surface condition = microvisible machining trace Processing method = vehicles, boring, shaver, milling, 1 ~ 2 PM/cm ^ 2, pull, grinding, file, roller, milling tooth The application example = the surface of the other parts, such as box, shell, and cover, etc. The working surface of a fixed supporting surface such as a fixed supporting surface, such as a fixed shaft, key and keyway, is required. The surface of