加气混凝土砌块墙体施工方案(国外英文资料).docVIP

加气混凝土砌块墙体施工方案(国外英文资料) The Taiwan affairs office of the state council Renovation and renovation works in the middle of guangan tower The case of gas concrete block wall construction Preparation: The examination and approval: Build a development company in China The department of Taiwan affairs office of the state council refurbishing the ministry of management 2006.10.25 Gas concrete block wall construction plan First, preparation for construction Technical preparation (1) to review the drawings of the construction site before the brickwork is laid and to be familiar with the design requirements and standards. Prepare the construction plan of masonry masonry according to the design requirement and quality standard. (3) the plan for the use of labor and materials and construction equipment according to the requirements of the construction plan. Material requirements (1) the size of the added gas concrete block is: Length (mm) : 600; Height (mm) : 250; Width (mm) : 100 (2) gas concrete block technical performance: the density is divided into 500, 600, 700kg/m3. (3) the performance indexes of the gas concrete blocks shall be in accordance with the provisions of the following table. Items are project Refers to the standard The class of 500 The class of 600 The class of 700 one Density (dry condition) (kg/m?) 500 + 50 600 + 50 700 + 50 2 Cube strength (MPa) 2.7 or higher 4.0 or higher 4.7 or higher 3 Drying shrinkage value (mm/m) Temperature 20 + / - 1 ℃, relative humidity 41% ~ 41% under the condition of determination 0.5 or less 0.5 or less 0.5 or less Temperature 50 + / - 1 ℃, relative humidity 28% ~ 28% under the condition of determination 0.8 or less 0.8 or less 0.8 or less 4 Antifreeze (freezing) After 15) Weight loss (%) 0.5 or less 0.5 or less 0.5 or less Strength loss (%) 20 or less 20 or less 20 or less (4) the dimensions of the gas concrete blocks shall allow deviation and appearance quality to conform to the rules of the table below. item Allows for deviation