施工1(国外英文资料).docVIP

施工1(国外英文资料) Chapter 8 the main construction methods of the pile foundation Construction technology The measurement of engineering, the excavation of the barrel, the right of the pile machine, the drilling hole to the rock, the identification of the rock and the steel and the steel cage The injection pipe goes to the pipe, the secondary clearance, the concrete and the pouring concrete and the filling pile hole. Method of construction: the construction method of the mud retaining wall and anti-recycle process. 8.3 process 8.3.1 engineering is used in the construction of the construction of the wall of positive and reverse circulation mud. The pile machine should be adjusted before construction 48.4 process of clearance and cleaning After the construction pile up to the base of the design pile, the tool of the pile machine is used to recycle the hole and make the hole inside When the mud weight is less than or equal to 1.20, the punch will be finished. 8.5.3 to hoist the steel cage by lifting crane crane, the transport of steel cage with manual handling, transportation and lifting to prevent the deformation of the steel cage. 8.6 concrete mixing and filling process 8.6.1 engineering concrete is used in the construction of concrete. 1) each pile is made of concrete blocks. 2) a pile of collapse is measured at least once. 3) the underwater concrete must be continuously constructed, and the time of each pile is controlled by the initial setting time of the initial concrete. Chapter ix the main construction method of the basement 9.1 order The excavation of the foundation pit, the excavation of the soil, the concrete pad layer, the waterproof construction, the construction of the concrete protective layer of fine stone concrete, the foundation, and the steel of the base plate The reinforcement of the band, the base plate, the foundation concrete, the concrete wall, the column reinforcement and the erection of the installation Go to the concrete wall, the wall of the column