污水处理设施的运行操作管理与维护(国外英文资料).docVIP

污水处理设施的运行操作管理与维护(国外英文资料) Operation and maintenance of sewage treatment facilities 1, 1 # adjustment pool (fermentation waste liquid) (1) procedures and procedures: A, the staff open 1 # adjustment pool to stir, open 2 # automatic + medicine cabinet to mix for half an hour, etc. The agent fully dissolves. B, start the belt conveyor, and wait for the fermented mud. C, start 2 # air compressor, wait for empty pressure is 0.5 MPA, zhang luo filter bag, open text machine, concentrator, open D, start 1 # adjustment pool stirring, start the pump, start to take off the fermentation liquid, observe the water and water quality condition, adjust the PAM concentration. E, start the pressure filter mixer or pump, pump the dehydrated fermented waste water into the sediment pool, open the lock manually and let it flow into the 2 # regulating pool. F, fermentation liquid after the dehydration, the operator will filter cloth clean, thickener, host, interlayer is rinsed clean both inside and outside, filter pool with large thick hose around the pool, submersible pump head if there is a scum should catch up, to prevent clogging pump. (2) basic maintenance of equipment A, processing empty fermented waste liquid every day. The inside of the dewatering machine should be cleaned thoroughly, the lining must be cleaned, the air pressure machine must be drained regularly, the oil is changed, and the air pressure filter is cleaned. B, transmission parts, bearings, deviating from the version of the trajectory, the host drive chain, transmission gear often should add lubricating oil, rolling firmware to prevent loose and should be inspected regularly influence life span. C, automatically add medicine cabinet after use, want to clean clean, decelerate machine takes half a month to inspect, add lubricants. D. often check the filter bag to deflect the system. E, check if the deviation block is smooth and spread butter on the slide regularly. Main process control points Pressure filter concentratio