焊工试题1(国外英文资料).docVIP

焊工试题1(国外英文资料) Intermediate welders test selection Description: The point. According to the development trend of examinational examination, we chose to fill in the blanks and judge two types of questions. Scope of knowledge Knowledge of metal materials and heat treatment Basic knowledge of welders electrician 3) welding electric arc and welding metallurgy knowledge Gas protection welding process and equipment Other process and equipment for welding (6) metal material welding 7) welding stress and deformation Welding defects and testing Knowledge of relevant industry and technology Some junior jobs were included in the relevant intermediate exam. Please take note Pay attention to different questions of the same problem or different ways of asking questions Select the correct answer (select the correct answer, and fill in the corresponding letter) The smallest unit of geometry that can fully reflect the lattice features is called () A grain B crystal cell C crystal The purpose of () is to make the crystal nucleus grow smaller A heat treatment B metamorphosis treatment C cold processing D reinforcement processing The same thing happens when a metal happens to be isostatic A metal creep B metal and metal deformed D metal A phenomenon called () in which the metal is transformed by temperature in the solid state by the transformation of one lattice into another. A lattice transformation B crystals transform C and the same isomorphic transformation The binary alloy phase diagram is established through () method A simulated B for the C test D analysis Carbon dissolves in the gamma-fe of the face centered cubic lattice. A ferrite B austenitic C carburized D lystenite The tissue formed in the gamma-fe of carbon is called the austenite A metal crystal, B, C, C, and C The cotectic line on the iron carbon diagram is the () line. A ACD B ECF C PSD D GS The GS line in the iron carbon diagram is the starting line for the austenitic cast iron in cooling, and the austenitic transforma