挡水围堰和抛石挤淤施工计划战争而安排(国外英文资料).doc

挡水围堰和抛石挤淤施工方案和平而布置(国外英文资料) The construction plan of water retaining cofferdam and parabillite is arranged in peace First, the general situation of the project The blocks in the K6 + 280 ~ K6 + 500, + 760 ~ K6 K6 + 990 section of road embankment fall into the old port riverbed respectively, its size is differ, and K7 + 020 old dagang river across the road, and had a K7 + 020 left picture of 36 m and a horizontal drainage pipe culvert and roadbed along the road direction arrangement has a water tank, box culvert section size is 6.5 * 4.5 m2 and 6.4 * 4.4 m2. According to the design drawings and technical disclosure content and other related documents, the three river section, place inside all adopt the ripped-rock crowded silting scheme for construction, riprap engineering amount is about 40000 m3, which K6 + 280 ~ K6 + 510 section of about 15000 m3, K6 + 760 ~ + 990 section of K6 is about 15000 m3, K7 + 020 is about 10000 m3. Second, construction deployment and method Because the three segments, discontinuous, and stone, a lot of work, be using piecewise construction scheme of riprap crowded silting, namely the segmented closure, pumping water, stone, crowded silting. First, the embankment of the old great harbor river, which is translocated in the area of K7 + 020, is handled by the embankment. On both ends of the first step, the closure, use of already built a good construction road south, as water retaining cofferdam, the north end of the road at the slope foot picture to do a water retaining cofferdam, location and section size see layout; Second, drain the water from the drain and drain the river. Third step, riprap crowded silting, stone, from south to north, along with the cast over crowded, silt crowded to near the north end of the water retaining cofferdam, the silt with drivers piled up in the river on both sides of the green belts. Because there are horizontal pipe culvert at K7 + 020, the south elevation of 34.2 m, the northern tip of 33.8 m, tossing the