从硅渣中提取工业硅的新方法(国外英文资料).docVIP

从硅渣中提取工业硅的新方法(国外英文资料) 87.92 1.5 0.12 10 0.30 0.1 0.06 100 Table 3 entry furnace material composition The name of the Si SiO2 C FeO Al2O3 CaO other A combined Charging material % 88.90 6.31 0.12 0.30 0.10 4.19 0.08 100 Table 4 slag composition The name of the 3 al2o3. 2 sio2 CaO, SiO2 FeO. 2 sio2 SiC Si A combined Slag % 0.63 94 0.80 3 2 100 Table 5 product components The name of the Si C FeO Al2O3 CaO other A combined Silicon % 99.50 0.02 0.30 0.06 0.03 0.09 100 Silicon slag Hand picking Supplementary material 2 Accessories 1 Sorting machine ingredients Refining furnace pouring broken inspection unqualified qualified Returns the ingredients Put in storage FIG. 1 process flow chart of silicon slag recovery process 6 of workshop Industrial silicon is a high-energy enterprise, which consumes a lot of power, and the silicon slag refining workshop should be equipped with a cheap energy base near the source of raw materials. Silicon slag recycling consists mainly of raw material, machine sorting workshop, mixing workshop, melting workshop, dust removal facilities and auxiliary facilities. The machine is divided into the workshop, the mixing workshop, the melting workshop, the warehouse, the dust removal facilities and the distribution room for the joint workshop. The machine sorting workshop sets up the yard, the machine sorting equipment, belt conveyor, the material is carried by belt conveyor to the batch workshop. The dispensing workshop is connected to the machine sorting workshop. The melting workshop sets up a fork lift truck, a purifying furnace, pouring area and a broken workshop. The circulating water pump room of the purified furnace is located near the electric furnace workshop, and it is located in the lower part of the furnace, and the gas purification facility of the electric furnace is also near the workshop. The length of buildings around the furnace workshop is shorter than the length of the electric furnace workshop. Refining furnace set two cooling poo