变结构可抛掷球形机器人的运动分析.pdfVIP

第38 卷第2 期 机器人 ROBOT Vol.38, No.2 2016 年3 月 Mar., 2016 DOI ：10.13973/ki.robot.2016.0154 变结构可抛掷球形机器人的运动分析 叶长龙，梁海超，于苏洋，姜春英 （沈阳航空航天大学，辽宁沈阳 110136） 摘 要：针对灾后、战后等复杂地面环境，开发了一种能够以抛掷或发射方式进入工作区域进行作业的变结 构机器人．该机器人能够以球形结构通过抛掷或发射的方式越过现有大部分地面移动机器人无法通过的地面障碍． 同时，在到达工作区域后，机器人能够变形为具有2 个被动自由度的四轮移动机器人以完成移动作业．为了对机 器人进行有效的运动控制，针对展开结构建立了考虑前、后车体几何约束及驱动轮无横向滑移约束的运动学模型， 分析了机器人在进行曲线运动时产生轨迹误差的原因．仿真得到了机器人做正弦曲线运动时的轨迹误差，并分析 了误差的影响因素．通过实验对建立的模型和仿真结果进行了验证，证明机器人具有较好的运动灵活性． 关键词：球形机器人；可抛掷；变结构；运动学；轨迹误差 中图分类号：TP242 文献标识码：A 文章编号：1002-0446(2016)-02-0154-06 Kinematic Analysis of a Throwable Spherical Robot with a Variable Structure YE Changlong ，LIANG Haichao ，YU Suyang ，JIANG Chunying (Shenyang Aerospace University, Shenyang 100136, China) Abstract: In view of the complex ground environment after disasters or wars, a robot with a variable structure is developed, which can be thrown or fired into the working area. The robot adopting spherical structure can be thrown or fired across some obstacles which are difficult for most existing robots to cross. After going into the working area, the robot can adopt the four-wheel structure with two passive degrees of freedom to realize the moving work. In order to control movement of the robot effectively, a kinematic model is established, in which the geometric constraint and the non lateral slip constraint of the front and rear bodies are considered for the unfolded structure, and the cause of the robot’s trajectory error along a curved path is analyzed. The simulation for the robot to follow a sinusoidal trajectory is performed, and the trajectory er