天线PLC遥控系统的设计封面中外文摘要.docxVIP

南京理工大学毕业设计说明书(论文)作者:学 号：学院(系):专业:题目:指导者：(姓名) (专业技术职务)评阅者：(姓名) (专业技术职务) 年 月毕业设计说明书（论文）中文摘要二十一世纪是一个信息化时代，而在接收信息方面又是一个重要的问题。由于信息网络技术的快速发展传统的手动进行天线方向的调节已不能满足无线电通信的要求。因此，研究设计一套可以足不出户就可以根据需求遥控天线的系统是满足当前无线电爱好者需求的一项课题。根据控制要求通过PLC输出相对应的脉冲控制步进电机旋转角度和正反转，从而快速调整天线方向的设计思想和设计方法，研究天线的转动方向与PLC输出的驱动脉冲、脉冲个数与角度的关系,使天线转动方向与脉冲串符合实际需求。本次课题综合运用了PLC的编程思想和传送、计算、比较等功能指令，来控制驱动脉冲的输出，从而精准控制步进电机的转角和方向而带动天线的精准定位。从而发挥了PLC在天线控制上配置灵活、安装操作简单、实现功能多等突出优点。关键词:可编程序控制器;天线;驱动器;定位角度;PLC。毕业设计说明书（论文）外文摘要TitleAntenna design of PLC control systemAbstractThe 21st century is an information age, and in receiving information is an important problem. Due to the rapid development of information network technology of the traditional manual adjust the direction of the antenna can not meet the requirements of radio communication. Therefore, the study design a set of can never leave home can according to the requirements for the remote control antenna system is a subject of meet the demand of the current radio enthusiasts. According to the requirements of control by PLC output corresponding pulse control stepping motor rotating Angle and the positive negative, quickly adjust the direction of the antenna design idea and design method, the research of the antenna direction and drive pulse of PLC output, pulse number and Angle of the relationship, the antenna rotation and pulse sequence in accordance with the actual needs. This topic integrated use of the PLC programming thought and transmission, calculation and comparison of the instruction, to control the output of the drive pulse, thus accurate control Angle and direction of step motor and drive the accurate positioning of antenna. Thus played a PLC on the antenna control flexible configuration, installation, simple operation, function more prominent advantages.关键词: 可编程序控制器; 天线; 驱动器; 定位角度; PLC。Keywords: Programmable controller; antenna; driver; position angle; PLC.