AB Sciex液质联用使用说明file structure and maintenance.pdfVIP

File Structure and Maintenance 11 11.1 Introduction ® This section will cover Analyst Software file structure in a Windows NT environment as well as routine computer maintenance to help keep your system running optimally. 11.1.1 File Structure on Drive C 1. On most factory supplied Dell computer systems two hard drive partitions should be present, Drives C and D. Analyst® Software is typically installed on the C drive. The path shown in Figure 11-1 is where you will find the Analyst® Software Program Files. Figure 11-1 File Structure on Drive C 2. Within the Analyst folder, four sub folders are present: bin contains the Analyst® Software program files. WARNING! There is no reason to ever change anything in this folder. Firmware contains the instrument system controller firmware. These files are used following installation and some software upgrades and should otherwise be left unchanged. Tutorial 127 File Structure and Maintenance Help contains the built-in help files as accessed from the Help menu in the program. Simulation contains the instrument data files needed to run Analyst® Software in simulation mode. 11.1.2 File Structure on Drive D