东风牌DFH1050BX4B重型货车驱动桥的设计【毕业论文+CAD图纸全套】.doc

摘　　要 本次设计的题目是设计。驱动桥一般由主减速器、差速器、半轴及桥壳四部分组成其基本功用是增大由传动轴或直接由变速器传来的转矩，将转矩分配给左、右车轮，并使左、右驱动车轮具有汽车行驶运动学所要求的差速功能；此外，还要承受作用于路面和车架或车厢之间的铅垂力、纵向力和横向力。 本首先论述了驱动桥的，分析驱动桥各部分结构型式确定总体设计方案：桥壳采用在本次设计中，主要完成了的设计桥壳CAD绘图等工作。 驱动桥；；CAD； ABSTRACT The object of the design is The Design for Driving Axle of truck of Cellon Ⅱ CA1080. Driving Axle is consisted of Final Drive, Differential Mechanism, Half Shaft and Axle Housing. The basic function of Driving Axle is to increase the torque transmitted by Drive Shaft or directly transmitted by Gearbox, then distributes it to left and right wheel, and make these two wheels have the differential function which is required in Automobile Driving Kinematics; besides, the Driving Axle must also stand the lead hangs down strength, the longitudinal force and the transverse force acted on the road surface, the frame or the compartment lead. The configuration of the Driving Axle is introduced in the theses at first. On the basis of the analysis of the structure ,the developing process and advantages and disadvantages of the former type of Driving Axle, the design adopted the Integral Driving Axle, Single Reduction Gear for Main Decelerator’s deceleration form, Spiral Bevel Gear for Main Decelerator’s gear, Full-floating for Axle and stamp-welded steel sheet of Integral Axle Housing for Axle Housing. In the design, we accomplished the design for Single Reduction Gear, tapered Planetary Gear Differential Mechanism, Full-floating Axle, the checking of Axle Housing and CAD drawing and so on. . Key words: Drive axle；Main reducer；Differential；Axle；Bridge shell；CAD；Design；Check   目 录 摘要 I Abstract II 第1章 绪论 1 1.1 研究背景 1 1.2 驱动桥研究的目的和意义 1 1.3 驱动桥研究状况与发展趋势 2 1.3.1 发展状况 2 1.3.2 驱动桥发展趋势 2 1.4 主要研究内容 4 第2章 驱动桥结构方案拟定 5 2.1 驱动桥的结构和种类 5 2.1.1 汽车车桥的种类 5 2.1.2 驱动桥的种类 5 2.1.3 驱动桥结构组成 5 2.2 设计要求 10 2.2.1 适用车型 10 2.2.2 设计基础数据 10 2.3 本章小结 10 第3章 主减速器设计 11 3.1 主减速器的结构形式 11 3.1.1 主减速器的齿轮类型 12 3.1.2 主减速器主、从动锥齿轮的支承形式 12 3.2 主减速器的基本参数选择与设计计算 13 3.2.1 主减速比i0的确定 13 3.2.2 主减速器计算载荷