6 000 kg机械叠加式力标准机的研制.pdfVIP

2008 年 2008 仗.越术品惜 t 据 第 11 期 Instrument Technique and Sensor No.11 6 000 kg 机械叠加式力标准机的研制 马洪友，张振洲，关虹，余菁华 (沈阳仪表科学研究院，辽宁说阳 11例43) 摘要:力标准机用于称3宣传感臻、三级测力计的检定和校验，是传感器生产中必备的检测设备。 6 饥则 kg 机械叠加式 为标准机，采用西门子伺服驱动系统、精密滚珠丝杠副、大i率比精密减速机等，实现 nm 级微位移i是给，满足 JJG734-2∞l 力标准机的要求和称宣传感器因际标准(OIML) 阁陈建议 No6O要求。该设备长期稳定性好，精度禹。 关键诩:叠加式;力标准机;有lß民驱动;纳米级位移 中国分提号:TP2 12 文献栋i只码:A 文章编号: 1002 -1841 (2008) 11 -0032 -02 Development of 6000 kg Machinery Superimposition Type Force Standard Machine MA Hong-fa , ZHANG Zhen-zhou , WU Hong , YU Qing-hua (Shenyang Academy of Instrumentation Science , Shenyang 11ω43 ， China) Abstract: Forc暗自tandard machine is used for the measurement and calíbration of weighing sensors and three level d归amome­ ters , it is the d配tection equipment required in the production of sensors. The 6α)() kg machinery superimposition type force 串tand­ ard machine adopted Siemens servo drive systems , precision ball screw deputy , the speed ratio precision reducer , etc. The equi p- ment achieve the nanometer micro-displacement feed to meet the JJG734-2ω1 force standard machine requirement , and weighing 附附or intemational standard [OIML] intemational recommendatíons N而O. The 叫uipment has long-time stability and high preci- slon. Key words: superimposition type; force standard plane; servo actuates; the nanometer level displacement 。 引富 年要更换 1 ìJ;:，每次更换都要排气、检漏，给生产单位带来不 力标准;机用于称重传感棉、立级测力计的检定和校辙，是 倪。脱电陶黯式叠加力标准机是通过机械方式粗加载、压电陶 锻产生和精密调节力值。国内现有的接力日式力标准