说明书杨国宇.docxVIP

长春大学电子工艺实习报告题目名称组装收音机院（系）电子信息工程学院专业（班级）自动13403学生姓名杨国雨指导教师庄乾章起止日期 2015-07-06至2015-07-10 组装收音机电子工艺实习[摘要]?电子技术实习的主要目的就是培养学生的动手能力,掌握一定操作技能并亲手制作几种实际产品,有助于学生对理论知识的理解,帮助学生学习专业知识,使学生对电子元件及收音机的装机与调试有一定的感性和理性认识。收音机、电视机等常用小家电电器组装是电子电器专业的综合实习的主要内容。本文就如何组装超外差收音机这一小家电进行探讨，它主要由输入回路、变频级、中放级、检波级、低放级和功放级组成我们要知道它具有灵敏度高、工作稳定、选择性好及失真度小等优点。强调一整套完整、严密的工序过程和检测方法，目的是提高实习效果，增强学生对电子技术专业学习的兴趣。对电子专业的其它实习具有借鉴作用。[关键字]差分放大变频检波低放Assembled the radio electronic process practice[Abstract]Electronic technology practice of the main purpose is to cultivate the students’ practical ability, to master certain skills and personally produced several actual products, helps students not only understand and the theory of knowledge, help students to learn professional knowledge, so that students of electronic components and radio installed and commissioning has certain emotional and rational knowledge. The main contents of the comprehensive practice of the electronic and electrical equipment are the main contents of the electrical appliances, such as the radio, TV, and so on. In this paper how to assemble the radio a number of small household electrical appliances are discussed, emphasizes a set of integrity, strict process and detection method to improve the practice effect, enhance interest in student in students of electronic technology professional learning. The other practice of electronic specialty has reference function.[Key words] Differential amplification Frequency conversion Detection LC oscillation目录第1章常用元器件的介绍11.1电阻R11.2电容C11.3电位器W11.4电感器L11.5二极管D11.6晶体三极管Q2第2章焊接技术3第3章收音机原理43.1输入回路43.2变频级43.3中放级43.4检波级43.5低放级53.6功放级53.7收音机的工作过程5第4章实习步骤及总结64.1实习步骤64.2 实习总结64.2.1技能目标64.2.2实习重点、难点64.2.3实习用具64.2.4收音机的安装64.2.5收音机的调试7收音机参数测试8实习总结9附录一10附录二11第1章常用元器件的介绍1.1电阻R1）电阻从原理上分为固定电阻器和可变电阻器；从材料上分为碳膜、金属、金属氧化膜；从制作上又分为线绕、陶瓷、水泥、薄膜、厚膜、玻璃釉等。2）电阻阻值的标称一般使用色环方法表示。其中又有4环和5环之分，4环电阻误差比5环电阻要大，一般用于普通电子产品上，而5环电阻一般都是金属氧化膜电阻，主要用于精密设备或仪器上。1.2电容C按结构可分为：固定电容，可变电容，微调电容；按介质材料可分为：气体介质电容，液体介质电容，无机固体介质电容，有机固体介质电容；按极性分为：有极性电容和无极性电容。1）电解电容：标称