塑料模具加工流程（国外英文资料）.docVIP

塑料模具加工流程（国外英文资料） Shallow analysis injection molding process Time: 2009-11 editing: Open material: front molds, rear die material, insert material, line bits, injection moulding top material; Open box: front die frame, rear die frame; Injection mold processing plant; Rougher: the front die cavity is rough, the rear die cavity is rough and the parting line is rough. Bronze male: former mold material of moulding mold material, rear die copper male, divide model line clear Angle copper male; Line cutting: insert parting line, bronze male, diagonal pillow position; The computer gong: the molding of the mould, the mold and the die, the core of the die. Electric spark: front die, bronze male, male model line clear Angle, rear model bone position, occipital injection molding talent net; Drilling, pinhole, and thimble; Row bit, row bit pressure pole; Inclined top The pin, injection mold processing factory and the thimble; Other: (1) (1) (1) (1) (1) (1) (1) (2); (1) (2); (1) (2); (2) (2) flying mode; Water port, head, spring and injection mould cost analysis. The province model, polishing, front and rear molds; Fine water structure, pull rod screw hook, spring Injection molding weifang quench, line surface nitride; Model engraving. Mould design knowledge Design basis The size of the ehs is correct for its relative dimensions. According to the whole product of the whole product of the plastic products to determine the outside quality and the size of the specific injection molding process: The appearance quality requirement is higher, the dimension precision requires the lower plastic products, such as toys; Functional plastic products, strict in size; Both appearance and size require strict plastic products such as cameras. It is reasonable for tianjin injection moulding to get out of mold. The deformability is directly related to the moulding and quality of the plastic products, i.e. whether the injection can be carried out smoothly during the injection process: There is eno