基于电流型斩波控制器的盘式无铁心永磁同步电机控制方法_王晓光.pdfVIP

35 9 Vol.35 No.9 May 5, 2015 2310 2015 5 5 Proceedings of the CSEE ©2015 Chin.Soc.for Elec.Eng. DOI 10.13334/j.0258-8013.pcsee.2015.09.027 0258-8013 (2015) 09-2310-08 TM 351 ( 300072) The Control Strategy of Disc Coreless Permanent Magnet Synchronous Motor Based on the Current Chopper Control WANG Xiaoguang, WANG Xiaoyuan, FU Tao (School of Electrical Engineering and Automation, Tianjin University, Nankai District, Tianjin 300072, China) ABSTRACT: The disc coreless permanent magnet 0 synchronous motor is able to deliver strong overload ability, zero cogging torque, the sinusoidal distribution of flux density, the small armature reaction and the linear parameters etc. But Halbach for the coreless structure, the motors tend to have low inductance. As a result, the motor winding current experiences very high ripple current and the large motor torque ripple if driven from conventional drivers with the pulse width modulation (PWM) control based on voltage source [1-2] inverter(VSI). To solve this problem, a novel automatic control method based on a current chopper converter has been [3-6] proposed. The current was regulated by the proposed current control algorithm according to the value of the angle of the [7-10] rotor angle sensor feedback, and the torque has been controlled. The problem of discontinuous currents caused by the low [11] inductance has been solved by the control strategy proposed in