多级注入式电流源型STATCOM模型和非线性控制策略研究_罗振鹏.pdfVIP

42 6 Vol.42 No.6 2014 3 16 Power System Protection and Control Mar.16, 2014 Multi-level reinjection current source converter STATCOM modeling and nonlinear control strategy 1, 2 2 3 LUO Zhen-peng , LIU Yong-he , YANG Bao-feng (1. College of Energy and Power Engineering, Inner Mongolia University of Technology, Hohhot 010051, China; 2. Faculty of Eletric Power, Inner Mongolia University of Technology, Hohhot 010080, China; 3. Inner Mongolia Power Research Institute, Hohhot 010020, China) Abstract: This paper presents a novel MLCR-CSC-STATCOM topology, particularly suitable for the high power applications. Injection control technology, multi-level technology and zero level technology are used, which enables main bridge switch working in fundamental frequency to output continuous controllable AC current and high-quality current waveforms and meantime better resolve the absorption capacitance problems of conventional CSC without installing AC capacitor. This paper derives the mathematical model of MLCR-CSC-STATCOM, adopts feedback control linearization means for the affine CSC-STATCOM equations and replaces the nonlinear control design with linear state equation design. By use of PSCAD/EMTDC tools, the established model of MLCR-CSC STATCOM is simulated and some specific conclusions are drawn. Key words: CSC; model; STATCOM; linear; reinjection; multi-level TM76 A 1674-3415(2014)06-0052-06 CSC