变电所用无机复合材料盖板技术规范(国外英文资料).doc

变电所用无机复合材料盖板技术规范(国外英文资料) Inorganic composite material cable ditch cover plate Inorganic composite Technical specification for cable trench cover plate (used in substations) Two years, September 10th Inorganic composite material cable ditch cover plate 1, scope This specification establishes the product classification, technical requirements, test methods, inspection rules, quality control and product marks, packing, transportation, storage and use range of the cable cover plate of inorganic composite material. 2, reference standards The following standard terms and conditions may be used in accordance with the provisions of this standard, where conflicting standards prevail. GB175 general Portland cement GB8076 concrete admixture Hot rolled round steel bars for GB13013 reinforced concrete GB1499 hot rolled ribbed steel reinforced concrete GB/T14684 building sand GB/T14685 pebble and crushed stone for construction Mineral admixtures for GB/T18736-2002 high strength and high performance concrete Code for acceptance of construction quality of GB50204-2002 concrete structures JGJ63 standard for mixing water for concrete GB/T18369 non alkali glass fiber non twist coarse gauze. Standard for inspection and evaluation of strength of GB/J107 concrete. JG3064-1999 steel fiber concrete 3, product classification The cable trench cover plate is divided into ordinary inorganic composite cover plate and RPC inorganic composite cover plate according to carrying capacity. 4, product model Physical and mechanical properties of cover plate (Table 1) Serial number Specification size (mm) Reference weight (kg) Bearing capacity (kN) Remarks Ordinary inorganic composite RPC inorganic composite light Heavy light Heavy One 500 x 500 * 40 Thirty Twenty-five Forty-eight Fifty Sixty-five Two 600 x 500 * 40 Thirty Twenty-five Forty-eight Fifty Sixty-five Three 700 x 500 * 40 Thirty-five Twenty Thirty-eight Forty Fifty-two Four 800 x 500 * 40 Forty Twenty Thirty-three Thirty-five Forty-five Five