橱柜常用尺寸(国外英文资料).docVIP

橱柜常用尺寸(国外英文资料) Here is a common size (mm): Cabinet height: General 750 to 850; length: according to kitchen conditions; depth: General 400 to 600; Cabinet door height: usually 600 to 750; width: generally 300 to 500; Hinge length: generally 40 to 50; the width of 30 to 40; Basket width: usually 300 to 400, height: generally 500 to 600; The distance at the sink size: 80 to 120; The stove at the distance size: 80 to 120; Internal partitions in cabinet height: generally 350 to 450; Width of partition board: generally narrower than cabinet 40 to 50, length: according to the length of door, thickness: generally 10 to 18; If you want to install a drawer, you should measure the length of the drawer: usually equal to the width of a single door or double door; Depth: generally narrower than the cabinet, 40 to 50, height: a single door, 3 drawers, 2 small, 1 large; double doors, 2 drawers, the same height; As well as the length of the chute: both can be used. The second step: cabinet decomposition design Cabinet decomposition design is to design a good cabinet, in accordance with the table, diaphragm, vertical plate, respectively, marked size, the amount of calculation. Determine the size of the hole for the cooker and sink. Prepare materials: tape measure, computer graphics software, pre measurement size, design drawings. Buy kitchen range, sink. (or an introduction to know the size of a hole) Work done: 1, the surface is the upper surface of the cabinet, finished product cabinets generally use man-made stone, natural stone. Rural cabinets can also be made of artificial stone, natural stone, so you do not need to make the upper surface of the cabinet. After the completion of the construction, you can go to the cabinet store directly to order. I am using tiles on the surface. Tiles can be made of wall tiles or floor tiles. I use wall tiles. Advantages are: wall tiles, cabinets, mesa, very shiny, clean when the shiny, very strong texture. Its very good, too. Its very clean. It