滚轧直螺纹钢筋连接接头(国外英文资料).docVIP

滚轧直螺纹钢筋连接接头(国外英文资料) Rolling straight thread reinforced bar joint joint 1 range This standard specifies the requirements, sampling, testing methods, classification and marking of rolled, straight threaded reinforcement joints. This standard applies to the concrete structure with HRB335 class, HRB400 class, RRB400 grade steel (can be directly rolled or pre processed), eventually rolling to form a straight thread of various forms of steel joints 2 normative reference documents The clauses in the following documents by the standard reference in the provisions of this standard. For dated references, subsequent amendments (excluding corrections) or revisions do not apply to this standard. However, encourage the parties to reach an agreement. According to the research of the latest version of the standard is the use of these documents. For undated references, the latest edition is suitable for this standard. Basic dimensions of GB / T L96 plain thread Tolerances and fits of GB / T L97 plain threads GB / T 228 tensile test method GB / T 699 high quality carbon structural steel GB l499 for the reinforcement of concrete hot rolled ribbed bar GB / T L591 low alloy high strength structural steel GB l3014 reinforced concrete treated with waste heat reinforcement GB / T l4791 thread terminology General technical specification for mechanical connections of JGJ and l07 steel bars 3 terms and definitions The following definitions are used in this standard Three point one Rolled parallel, thread, splicing, of, rebars The end of the reinforcing bar is made into a straight thread by a rolling process, and the joint of the two reinforcing bars is connected with the corresponding connecting sleeve Three point two Rebar, head, with, screw, thread End of a steel bar threaded by rolling Three point three The connection sleeve is simply splicing coupler A connecting piece for connecting steel bars and having an internal thread corresponding to the thread of the thread Three point four Full t