塑钢窗质量技巧标准 80系列(国外英文资料).docVIP

  • 10
  • 0
  • 约1.45万字
  • 约 5页
  • 2017-06-08 发布于河南
  • 举报

塑钢窗质量技巧标准 80系列(国外英文资料).doc

塑钢窗质量技巧标准 80系列(国外英文资料)

塑钢窗质量技术标准 80系列(国外英文资料) Galen 1-6 # tall building plastic doors and Windows Quality technical standard and construction installation payment method 80 series model steel window is now the most widely used heavily construction market is the most popular of the Windows of the products, according to the relevant national standard and industry standard of the construction industry and related specifications, mainly for: Common hollow, meet 0.4 Pa wind pressure requirement. Color or white. 3. The wall thickness is not less than 0.5 ㎜ wall thickness is 1.2 1.5 ㎜ profile wall thickness, etc. Steel: 1.2 ㎜, anti-corrosion, landmark 1.2 ㎜, depending on the requirement of air pressure. Glass: 5-8-5 or 5-8-5, white, more than 1.5 ㎜ single tempered, indoor below 0.9 ㎜ single drum. Rubber bar: choose three yuan two propylene high quality adhesive tape. The seams of glass and glass and slot shall be flat, not to be rolled, and the drain should be free Samples, manufacturers, prices, manufacturing capacity, equipment, scale, production of relevant products, and user response. Product certificate, performance test report, reinspection report, air tightness test, etc. Steel doors and Windows should meet the requirements of building and structural safety, and design and manufacture shall carry out the necessary strength tests. More than 1.5 square should use safety glass, open window need additional gauze fan. Article spell file material, such as spelling, spelling a officer, reinforced assembly, joining together, the structure of the large Windows and doors, splicing shall conform to the resistance to wind pressure calculation and structural calculation, including structural design, such as node joining together, usually filled with styrofoam. The thickness and setting of the inner lining of the steel section are in line with the national standards. The shape, color, flatness, packing and sealing are in accordance with the design requirements The surface should be clean, flat,

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档