U盘外壳塑料模具设计毕业论文doc.doc

摘 要 U盘是当今社会日常中必不可少的工具。U盘产品的外壳造型很多，市面上不断出现着各种款式，我们选用这一款U盘外壳（材料ABS）ABSTRACT U disk is a daily tool, which is necessary in today’s society. The shell of U disk products is continuous updating following on the market requirement. We choose this shell shape of the U disk to mold design. Through the analysis and research, and consult involved technical literature, then choose the material and involved technical parameter, designed this style of U disk shell shape mold. The design project is divided into three parts. The first part is about the working theory and application of a plastic injection mould, the principle of designing and the introduction of the production about plastic mould. The second part is about the designing and calculation of the mould. It including: the selecting of the injection machine, the structure designing of the plastic mould and the inject system of mould. Pro/ENGINEER was used in this practice, it provide a good design environment for products design and mold design. It combined the process of products design with manufacture. 【KEY WORDS】 U disk , shells , ABS , injection mold, Pro/ENGINEER 目 录第1章 绪 论 1 1.1 注塑模具概述 1 1.1.1注塑模具设计的特点 1 1.1.2 注塑模具的组成 2 1.1.3 注塑模具的分类 3 1.2 Pro/E注塑模具概述 3 1.2.1 Pro/E概述 3 1.2.2 Pro/E 注塑模具设计解决方案 4 1.2.3 Pro/E模具设计的基本流程 5 1.2.4 Pro/E注塑模具设计的应用 6 1.2.5 基于Pro/ENIGEERING的 CAD/CAM的发展趋势 7 1.3本次选题的意义 9 第2章U盘塑料外壳（塑件）造型设计 10 2.1 参数化设计概述 10 2.2基于Pro/ENIGEERING的参数化造型设计过程 11 2.3 U盘塑料外壳效果图 14 第3章 注塑成型工艺的可行性分析 15 3.1 U盘外壳（塑件）的选材及其材料性能分析 15 3.1.1塑件材料的选用 15 3.1.2塑件材料的性能 16 3.2 注塑工艺过程分析及工艺参数的设定 17 3.2.1 注塑工艺过程概述 17 3.2.2 利用Moldflow分析设定及调整主要注塑参数 18 3.3 塑件分析 24 第4章 基于Pro/ENIGEERING的注塑模具结构设计 25 4.1 整体结构的确定 25 4.2型腔数目的确定与排列方式 26 4.2.1 型腔数目的确定 26 4.2.2 排列方式 27 4.3 基于Pro/ENIGEERING的分型面设计 27 4.4 排气槽的设计 29 4.5浇注系统设计 30 4.5.1浇注系统的功能 30 4.5.2基于Pro/ENIGEERING的流道系统设计 32 4.5.3基于Pro/ENIGEERING的浇口设计 33