泡沫灭火系统测试用标准压力式比例混合装置.pdfVIP

3. According to operating parameters range （pressure range, flow range, mixing rate ）of pressure proportional mixing equipment, the size of main pipeline nozzle and throttle orifice used in three different specifications of proportional mixing equipment are calculated, and the design parameters of installation way, installation gap and pipe size between proportional mixing equipment and foam tank are checked; 4. The foam extinguishing agent of different classes, different expansion and different mixing rate is test by spectrophotometer and conductivity apparatus. The curve graphs of absorbance versus time and conductivity versus temperature are obtained. The mixed concentration test method of foam is done, and the mixing ratio test method applied to evaluation of studying device is selected ; 5. The foam extinguishing agent used in standard pressure proportional mixing equipment is tested in various pressure range and flow range. The mainly performance parameters and test parameters of standard pressure proportional mixing equipment are evaluated ; 6. The study on direct injection variable pump output proportional mixing equipment is proposed and future research work is done through deeply analysis of above research results. KEY WORDS：foam fire extinguishing system, proportioned equipment, mixing rate III 目 录 摘 要 I ABSTRACT II 第一章 绪论1 1.1 研究背景和意义1 1.2 现有混合液供给装置2 1.2.1 人工预混3 1.2.2 管线式比例混合器混合4 1.2.3 环泵式比例混合装置混合5 1.2.4 平衡式比例混合装置混合6 1