海运条件下超导磁体运输托盘力学性能分析.pdfVIP

Abstract Abstract Marine transport is the main transport mode of superconducting magnet. During its marine transportation, the superconducting magnet which is fixed in the ship has subjected random excitation, since swaying motion of the ship occurs under wave loads. Furthermore, the superconducting magnet has subjected shock load when loading and unloading. In order to ensure the safety of the superconducting magnet during transportation and loading and unloading, a set of transit pallet with sufficient intensity and rigidity need to be designed, its statics performance and dynamic performance also should be verified. The dynamic simulation analysis method has been applied to calculate the random vibration load upon the transit pallet during its marine transportation and the shock load during its loading and unloading. The numerical solution of the vibration isolation and shock isolation effect of rubber bearing is achieved. Then analyze the dynamics performance of transit pallet under random vibration load and shock load respectively by using FEM. The major contents of this paper are summarized as follows: The power spectrum density approach has been applied to simulate the random ocean wave according to random wave theory. The dynamic differential equations and power spectrum density of the ship which is subjected to the irregular wave loads has also been derived, and the power spectrum density curve of the ship swaying motion has been simulated. Implement structural statics analysis for the inner frame and outer frame of the transit pallet to calculate their stress and deformation. The result verifies that the transit pallet has sufficient intensity and rigidity. Mooney-Rivlin mod