各类故障原因分析1(国外英语资料).doc

各类故障原因分析1(国外英语资料) Classification of all kinds of trouble alarms: 1) equipment, board failure: 2M head fault, control panel, GPS temporarily can not lock star, 20DB coupler bad, 4G, fuse burned 2) blackout caused by: equipment power supply recovery, circuit breaker tripping, the owners of power caused by maintenance, call back. School holidays, POP has been changed to disable 3) environmental reasons: Microwave fault, bad weather caused 4) unknown reasons and false alarms: flashing warning, transient warning, Jiaxing letter production alarm (false alarm), interface no business, frequent user registration, round trip recovery, repeater version is too low. 5) after the resumption of the hidden fault recovery: network optimization restart equipment, after the platform refresh, re plug, monitoring card, pull back, resume, transfer, re circuit, return to normal. 6) engineering equipment: under the cutover RRU out of service caused, has been restored. Construction team construction, power transformation, power failure, equipment removal, sector is not in use, power construction caused blackouts, offline testing, and Unicom joint station, ready to move, POP disable, Device testing 7) indoor distribution failure: low noise causes equipment to be off-line 8) upgrade and other engineering equipment cutover reasons: test cases caused by TM equipment, electric network, the company has caused the province back HSTP to delete the signaling route of Hangzhous TSH1, so it has no warning, 9), local cable equipment fault board: the replacement of the rectifier module, replacing the pigtail. 10) bad connections: leader loose, 2M weld and 7/8 fault feeder head 11) 2M leased, transmission line fault: 2M line broken, transmission fault 12) 13) cable failure: fiber optic diversion 14) optical power optical attenuation: abnormal alarm has returned to normal, through the optical department after treatment to equipment pigtail for -11db attenuation, equipment has been restored to normal. 15)