集成运算放大器简介(国外英语资料).docVIP

集成运算放大器简介(国外英语资料) Integrated operational amplifier (OP AMP) is a direct coupling amplifier with high magnification. Between the input and output of the integrated circuit to access different feedback network circuit can be realized for different purposes, such as the use of integrated operational amplifier can amplify the signal, the signal operation is very convenient (add, subtract, multiply, divide, logarithmic, square root, anti logarithm, etc.), signal processing (filtering and modulation) and wave generation and transformation. There are many kinds of integrated operational amplifiers, which can be applied to different occasions. Classification of 3.2.1 integrated operational amplifiers According to the parameters of the integrated operational amplifier, integrated operational amplifiers can be divided into the following categories. 1. General Purpose Operational Amplifier General purpose operational amplifiers are designed for general purpose. The main features of this kind of device are low cost and wide range of products, and its performance index can be suitable for general use. Examples are A741 (Dan Yunfang), LM358 (Shuang Yunfang), LM324 (four OP AMP) and LF356 with field effect input. They are the most widely used integrated operational amplifiers. 2. high resistance operational amplifier The characteristics of this kind of integrated operational amplifier is a differential input impedance is very high, the input bias current is very small, general rid, (109~1012), IIB? For a few picoamps to dozens of picoamps. The main measure to achieve these targets is the use of field effect transistors with high input impedance, and the field effect transistors constitute the differential input stages of the operational amplifiers. Using FET as input stage, not only the input impedance is high, the input bias current is low, but also it has the advantages of high speed, wide band and low noise, but the input offset voltage is large. Common integrated devices are L