如何组装电脑(国外英文资料).docVIP

如何组装电脑(国外英文资料) Prepare before installation Before begin assembling computer, should first learn the basic knowledge of computer, including the hardware structure, use daily maintenance knowledge, common troubleshooting, operating system and the commonly used software installation, etc. Prepare the fittings before installation The installation should have its own plan, do not compare blindly, according to actual need to buy fittings. When choosing the case of the machine, should pay attention to the internal structure to rationalize, facilitate installation, two should pay attention to beautiful, color and other accessories match. Generally should choose vertical chassis, dont use obsolete horizontal case, especially in the case of power supply, it relates to the stability of the entire computer operation, the output power should not be less than 250 W, some processors also requires the use of 300 W power supply, should choose according to need. In addition to the chassis power, also need accessories in general and motherboard, CPU, memory, graphics CARDS, sound CARDS, bring in some sound card board), hard disk, cd-rom, VCD cd-rom and DVD drive), floppy disk, data cables, signal lines, etc. In addition to machine fittings, still need to prepare to use a screwdriver, pointed nose pliers, tweezers and so on. In addition, before installation, you will have a power plug for the room, which is described in section 1.4 of chapter 1. The basic step of installing a computer When assembling a computer, follow the steps below: (1) the machine box is installed, which is mainly to unpack the machine box and install the power supply in the cabinet. (2) the main board is installed on the main board. (3) the installation of the CPU, inserted the required CPU on the main plate processor socket, and installed the cooling fan. (4) the installation of the memory bar inserts the memory stick into the main board memory slot. (5) the installation of the video card, according to the card