实务重点(国外英文资料).docVIP

实务重点(国外英文资料) practice Load classification: the variation of time is divided into permanent load, live load and accidental load. In the classification of reaction of the structure static function (snow load, floor live load), the dynamic effect (earthquake, and the roles of crane equipment, high altitude falling objects critical role) The size of the load is divided into the load, the line load and the concentrated load. (PI. (P2) Use fixed number of year 2. Design: a temporary structure (5 years), second (25 years to replace structures), three categories (50 years Ordinary buildings and structures), four types (100 monuments and particularly important building structure). (P7) The minimum level of concrete for prestressed concrete components should not be lower than C40. (P8) The concrete protection layer is not less than 40mm and should not be less than 70mm (P9). 5. There are many influence factors in inclined section damage forms, such as section size, concrete strength grade, load forms, content of stirrup and bent up bar, etc., one of the biggest influence of stirrup ratio. (P9) The two sides of the expansion joint should be set up with a bearing wall, the foundation is not separate, and the foundation of settling seam must be separated. (P14) Number of civil buildings or highly classified; One to three layers as bottom housing, four to six layers of multilayer residence, seven to nine layers for the high-level residence, more than ten and ten layers for high-rise residential housing: in addition to housing and construction of civil building height is not more than 24 m for single layer and multilayer buildings, more than 24 meters for high-rise building; Civil buildings that are more than 100 meters high are high-rise buildings; (p16) Audio range and sound pressure level of indoor sound environment (1); Audio range; The frequency of the sound heard by the human ear: 20 ~ 20000Hz, which is called the audio range; Less than 300Hz sound is low frequency; The sou