正星加油机一般故障判断分析(国外英文资料).docVIP

正星加油机一般故障判断分析(国外英文资料) One, the tanker machine is turned on normal, but the oil gun does not produce oil. 1, the motor reversals or the transmission triangle is loose and broken. The power supply should be adjusted to adjust the tension wheel or to replace the band. Oil and gas separator failure; The tanker filter (including tapered screen) is seriously clogged. Wash the screen and remove the clutter. The oil and gas separator will not be able to produce oil from the oil tank. When servicing, remove the oil valve, remove the sundries and reload, so that they can move up and down. The small float of the oil and gas separator is oil or shed, which causes the high pressure cavity not to form high pressure, which also causes the tanker to not produce oil. The upper cover of the oil and gas separator can cause the high pressure cavity to be connected to the normal pressure cavity, causing the pressure cavity to not be high pressure and the tanker cant get oil. The filter mat or spring cushion for the oil and gas separator is damaged. Replace the damaged gasket; The conical valve of the oil and gas separator is not strictly closed. The blade pump failure; The vane pump overflow valve cannot be closed. Due to foreign bodies (broken shell, etc.) between the valve core and valve seat of the overflow valve, causing the oil always circulate in do not flow inside the pump, maintenance should take out the valve core, remove seat foreign body; (2) because of the pump blade with shrapnel do rotor high-speed operation for a long time, can wear, because of fatigue fracture, which resulted in increased within the vane pump leakage, serious when even lost sucker, pump maintenance should remove debris and broken blade, shrapnel, after change the new complex loading; (3) in combination with the pump vane pump and the oil and gas separator mat breakdown or negative, can also cause a vane pump of high pressure chamber and low pressure cavity connected, the vane pump lose oil discharge func