空调维修案例(国外英文资料).docVIP

空调维修案例(国外英文资料) Air conditioning refrigeration system maintenance case Refrigeration system failure is often the failure of the wind in our maintenance, fault phenomenon is multifarious, various, but there are rules to follow, the experience can be for reference. This is an inspection step for the failure of air-conditioning refrigeration system, although it is not necessary, but it should be repaired along the way. A key to the maintenance of refrigeration systems 1, observe work case inside and outside the machine, such as lamp panel display case, the machine is working, wind speed and output is normal, fan, compressor is running outside the machine, to judge it is electrical problem or system problem caused by not refrigeration. 2, test the air conditioner data: A, the air conditioning water condition, the average internal machine drops continuously the air-conditioner is normal, but the environment humidity, the temperature effect can only serve as A reference value. The temperature difference between the inlet and outlet temperature should be 12 to 14 degrees, but it will also be affected by ambient temperature and wind speed. Line pressure value C, measuring system, the general refrigeration in low pressure 0.45 Mpa to 0.50 Mpa, when heating high pressure from 1.8 Mpa to 2.2 Mpa, but pressure to influenced by environmental temperature, air conditioning inlet air temperature is higher, the higher the exhaust pressure, the higher the condensing temperature, small conversely; The higher the air conditioning load, the higher the suction pressure, the higher evaporation temperature (the evaporators normal evaporation temperature is between 5 and 7 degrees). The type of failure of refrigeration system Wall: 1, refrigeration systems frequently occurred in capillary and dry filters, because the two places is the most narrow place in the system, there are three common causes of congestion: dirty plugging, ice wall and welding. A, dirty plugging generally occur at the en