葫芦丝的制作(国外英文资料).docVIP

葫芦丝的制作(国外英文资料) The hulusi process An overview of the The hulusi is a strange flower in the garden of the Chinese nation, and she has a distinctive, rich and typical ethnic minority in the southwest. The structure of the hulusi is simple (figure 1), but the sound principle is hard to figure out. She has a narrow vocal range and an exceptionally rich expression. Although there are so many people who love the hulusi, there are few people who make her, especially those who make more. This is exactly: the simpler the instrument, the harder it is to get the best. There are a lot of hulusi lovers who want to make their own hulusi, but they dont have the resources to do it. Ive recorded my own observations of the hulusi, hoping to help beginners. Figure 1 The first chapter is made of the reed Section 1 selection The reed is the most critical part of the hulusi and is the most difficult to master. The material materials for the hulusi spring are usually made of phosphor copper, beryllium bronze or tin phosphorus bronze. By comparing and comparing the sound quality, sound color, volume and life expectancy, the bronze of tin phosphorus is preferred. The copper skin is usually 0.1 mm thick, but it is best to choose a 0.2mm copper, which will make it a good 0.1 mm after the forging. Because the forging has two advantages: first, it can increase the density of the copper skin and increase the elasticity, thus increasing the life of the reed. Second, because the copper skin is rolled over in the production process, the grain will inevitably form. The forging can eliminate or weaken the texture and improve the sound quality. Section 2 cutting The actual size of the reed is 25mm long and 10mm wide. Because the copper crust will be extended during the forging, it is important to consider the material. The copper skin of 0.2 mm, only need to be cut 7 millimeter wide, the length is usually 80 ~ 100 mm can. It is important to be aware of the texture of the copper skin and the length of