集电环系统浅析(国外英文资料).docVIP

集电环系统浅析(国外英文资料) The loop system is analyzed Rotating in the rotation of the electric conduction and signal transmission, need a static conductor good conductor and a rotation dynamic system, which is used to rotate the conduction or signal power transmission device is called collector ring (slip ring) system. In the collector ring system, the central ring is usually called a collector ring, which is known as the carbon brush. A brush with precious metals is called a brush or multiple brush. Support brush and keep the brush position device is called brush holder, cooperate with brush box called brush box, brush box installed on a device that can realize the carbon brush pressure that pressure, pressure refers to brush box assembly is called brush holder assembly, also called brush. According to the requirements of different collector ring can choose different materials in the design and manufacture, select material first consider is the condition of current density of conduction, environmental adaptation and mechanical properties of security. According to the factors such as the condition of the equipment, the number of destination, the design life of the device, the product demand maintenance cycle, etc. There are many structural forms such as assembly, molding, bridge, closed and open. According to the traditional experience, the materials of the ring are usually made of tin bronze, silicon brass, stainless steel, carbon steel and precious metals. In the design of the circuit system, the circuit material is set up according to the condition of the machine. After the material of the ring is determined, the current density and linear velocity are calculated according to the power, and the material of the carbon brush is selected. The correct choice of carbon brush material is crucial in the collector ring system, which determines the lifetime of the ring and the stability of the machine. There is a huge difference between the carbon brush used in different environme