广州数控GM代码（国外英文资料）.doc

广州数控GM代码（国外英文资料） G00 fast positioning G20 British units choice G72 radial cart cycle G01 linear interpolation G21 metric unit selection G73 closed cutting cycle G02 clockwise interpolation The G28 automatically returns the zero of the machine tool G70 processing cycle The G03 counterclockwise arc interpolation G30 machine tool 2, 3, 4 reference points The G74 axis is in the groove cycle G04 pauses Function of G31 jump The G75 radial groove cycle The G05 is in the arc interpolation G32 wait for screw cutting G76 multiple thread cutting cycle G6.2 clockwise elliptical interpolation G32.1 rigid thread cutting The G80 rigid tapping state is cancelled The G6.3 counterclockwise elliptical interpolation The G33 Z axon loop The G84 axis is to the rigid tapping G7.2 clockwise parabolic interpolation G34 screw thread cutting G88 radial rigid tapping The G7.3 counterclockwise parabolic interpolation G36 automatic tool compensation measurement X The G90 axis is on the cutting cycle The G12.1 polar coordinate interpolation G37 automatic tool compensation measure Z G92 thread cutting cycle The G7.1 cylinder interpolation G40 cancels the tip radius compensation G94 radial cutting cycle The G15 polar coordinates directive is canceled G41 tip radius left compensation G96 constant line speed = main shaft speed X | X | times PI sign 1000 (m/min) When the spindle speed: r/min thread cutting, although constant line speed control function can also be effective, but in order to ensure thread machining precision, dont use constant line speed control, thread cutting thread cutting should be in G97 state; The G16 polar command G42 blade radius right compensation G97 cancels constant line speed control The G17 plane selects the code G50 sets the artifact coordinate system G98 feed per minute ( The G18 plane selects the code The G65 macro code is called non-modal Every turn feed G99 The G19 flat selection code G66 macro program mode call G10 data entry is valid G67 cancels the macro program mo