微型计算机原理（国外英文资料）.doc

微型计算机原理（国外英文资料）= (166) D = (A6) H D, B = 0.11 (0.11) 253.25 is01 B = fd.4h 1011011.101 B = 5B. AH = 011000100101) BCD 1 write the form of the original code and complement of the following true values. (1) = X - 1110011 - b (2) = X - 71 - d (3) = X + 1001001 b Solution: (1) original code:complement:(2) original code:complement:(3) original code:complement:1.6 write the anticode and complement of the symbol. Solution: 11001010110101 1 We know what the truth of X and Y is, the complement of X plus Y. (1) X = -1110111b Y = + 1011010B (2) X = 56D = -21d Solution: (1)(2),3.2 set (DS) = 6000 h, (ES) = 2000 h, (SS) = 1500 h, (Si) = 00 a0h, (BX) = 0800 h, (BP) = 1200 h, data variables VAR for h. 0050, respectively, pointed out the following instructions, please source operand addressing mode? What is its physical address? (1) MOV AX, BX (2) MOV DL, 80H (3) MOV AX, VAR [BX] [SI] (5) MOV AL, B (6) MOV DI, ES: [BX] (7) MOV DX, [BP] (8) MOV BX, 20H [BX] Solution: (1) register addressing. Because the source operands are registers, the register BX is the address of the operands. (2) address immediately. The operand 80H is stored in the code section of the code block. (3) addressing directly. (4) the base address is a relative address. The physical address of the operands is (DS) * 16 + (SI) + (BX) + VAR = 60000H + 0800H + 0800H + 0050H = 608F0H (5) addressing immediately (6) the register is indirectly addressed. The physical address of the operands = (ES) * 16 + (BX) = 20000H + 0800H = 20800H (7) the register is indirectly addressed. The physical address of operands = (SS) * 16 + (BP) H = 15000 h + 1200 = 16200 h (8) the register relative addressing. The physical address of the operands = (DS) * 16 + (BX) + 20H = 60000H + 0800H + 20H = 60820H 33.3 hypothesis (DS) = 212AH, (CS) = 0200H, (IP) = 1200H, (BX) = 0500H, displacement DATA = 40H, (217A0H) = 2300H, (217E0H