汇编习题（国外英文资料）.doc

汇编习题（国外英文资料） Fills up the topic In addressing mode, the addressable register has __________ and _________. BX, BP The accumulator special transfer instruction IN indirect access I/O port, the port number is __________. 0-65535. The method of addressing the number of source operands in [di-4] is that... Register relative addressing mode (relative register addressing mode) Multiple choice After the execution of the 8-bit arithmetic operation in 1.8086, the result is, and the value of the ZF and SF marks is _A_____. A) ZF = 0 SF = 1 B) ZF = 0 SF = 0 C) ZF = 1 SF = 1 D) ZF = 0 SF is not sure The register that ACTS as a port pointer is _______D____. A) BX B) DI C) D) DX In command MOV ES: [SI], in AX, the target operands are ___d_____addressable. A) register B) direct C) the address of the base address is indirect Short-answer questions Write six common addressing methods. Immediate addressing, direct addressing, register addressing, register indirect addressing, register relative addressing, address addressing, relative base address addressing 2. In the absence of beyond description, general, objective data string, the source data, speaking, reading and writing data string, stack operation and instruction fetch operation respectively automatic choose which segment register collocation produce physical address? Automatic selection of data segment registers (DS) Destination data string automatically selects additional data segment registers (ES) The source data string automatically selects the data segment register (DS) The stack operation automatically selects the stack segment register (SS) Pick up the code segment register (CS) What is the addressing mode? What are the common addressing methods? The method for obtaining operands or operands addresses. Are: the most common ways of addressing immediately addressing, direct addressing, register addressing, register indirect addressing, register relative addressing, base indexed addressing, relative base indexed