相机维修（国外英文资料）.docVIP

相机维修（国外英文资料） Common failure maintenance of digital camera Digital cameras are highly sophisticated electromechanical products that can cause problems with improper use and defects. Heres a look at various troubleshooting and handling of digital cameras. Glitches: LCD displays distorted, skewed, blurred, confused, even black. Photo and video are all the same. A few years ago digital cameras were common. Such failures are the most frequent, and I have encountered CANON A70, A75, and S1 IS; SONY F717; NIKON 5700 and other aircraft have such failures. Cause of failure: CCD problem. The common feature of these fault cameras is that they all use SONYs problem CCD, which leads to the failure of the inside of the CCD. Solution: find the after sale directly. Such failures are repaired free of charge. Each manufacturer has a list of troubleshooting cameras, so you can check your camera to see if your camera is in the list, and if youre in the room, its free. The camera that is not in the list will have to pay for repairs. The method of maintenance is to replace the CCD, as if some maintenance department can remove the glass package from the fault CCD and rewire it before sealing it back. 2. Failure phenomenon: the picture is full of horizontal grain, excessive light, camera is normal. Cause of failure: the shutter is broken, open and not closed. Or the shutter is broken. Solution: check the shutter component and line, usually in line damage. This type of glitch is the most frequent of samsungs cameras, and you cant believe the horizontal stripes. Almost all samsung cameras could have this kind of failure because the shutter components line breaks. I dont understand, samsung cant you change a better quality of ribbon cable, and wrong with out a few years dont change, and even blues series now, there is the problem, have no language. For this kind of fault, samsung officials say it is free to repair, but in small places it may cost money to repair it. Suggest such failures, fri