监控器安装常见的15种故障分析（国外英文资料）.docVIP

监控器安装常见的15种故障分析（国外英文资料） Monitor installation of 15 common fault analysis DVR monitoring motherboard is 945 or 965, had better be independent video card, although there is a good motherboard, but because and monitoring card are not compatible, so just do alone with DVR monitoring motherboard can best to 1 g memory, if can use double not less than 512 m 512 m better memory card not less than 200 g hard disk, the bigger the better, the video is for long (parallel) with INTEL, can choose, there is no surveillance video acquisition card, I have a good variety of, suggest you can use soft card, but the CPU is above 3.0, is the main part of the host. One, the monitor host encountered power failure Monitor the host monitor, the host, and the speakers will be shut down in a flash. The data that is being written is lost, as is the possibility of a bad way to do disk reads and writes. The instantaneous voltage fluctuations that monitor the power failure of the main engine also impact computer hardware chips, circuits, resistors and so on. In order to avoid the accident, it is best to choose a brand power supply when installing the computer, thus minimizing the effects of voltage fluctuation on the hardware from the power supply. When the power is off, turn off all the power to prevent the display and ATX power from starting at the same time. This will cause damage to the hardware. When you use the WORD editing manuscripts, using WORDs automatic save function, if power failure moment happens to be in the disk, dont when it starts to skip the next boot disk test, to detect any bad way. Once the bad thing is found, you can fix or block a broken path with tools like NORTON and PQMAGIC. Additional, such as economic license, the selection of a UPS to provide power failure protection for monitoring host. Second, the monitoring power source is old To upgrade computers, such as add the new high speed drive, due to the monitoring host high rotational speed, power consumption is big also