超高压超临界流体撞击流方法制备破壁灵芝孢子粉的工艺研究_崔宁.pdfVIP

( ) Vol. 31 No. 4 504 Journal of East China U niversity of Science and Technology ( Natural Science Edition) 005-08 : 1006-3080( 005) 04-0504-05 1 1* 1 1, 1 崔　宁, 　潘家祯 , 　王春涛, 　杨燕勤 , 　王鲁敏 ( 1. 华东理工大学化工机械研究所, 上海 00 37; . 上海师范大学机电学 , 上海 01418) : 介绍了超高压超临界撞击流技术制备破壁灵芝孢子粉的方法及基本原理, 对制备工艺进 行了研究。加载压力、系统加热温度、保压时间及撞击靶距是影响灵芝孢子粉破壁率的因素, 通过正 交试验及对加热温度和撞击靶距所做的后续试验, 确定了采用自行研制开发的试验系统进行灵芝 孢子粉破壁的最佳工艺条件是: 加载压力300 MPa, 系统加热温度 50 °C, 保压时间1 h, 撞击靶距 10 mm 。在此工艺条件下, 灵芝孢子粉的破壁率为88. 48% 。 : 超高压; 撞击流; 超临界; 灵芝孢子; 破壁率 : T Q46 : A - Investigation on Preparation of Sporoderm Broken Ganoderma Lucidum Spores by the Method of Hyper High Pressure Supercritical Fluid Impinging Streams 1, - 1* , - 1, - 1, , - 1 CUI N ing PA N Jia z hen WA N G Chun tao YAN G Yan qin WA NG L u min ( 1.Research Institute of Process Equip ment Pressure essels, East China University of Science and Technology , Shanghai 00 37, China; .Engineering Colleg e of Machinery Electronics Inf ormation, , 01418, ) Shanghai N ormal University Shanghai China bstract: This paper investigates the preparation of sporoderm-broken ganoderma lucidum spores by the method of hyper high pressure supercritical fluid impinging streams. T he fundamental principles of this . - , method were also introduced Factors affected the sporoderm broken ratio include working