AS-i 总线技术及其应用(国外英文资料).doc

AS-i 总线技术及其应用(国外英文资料) The AS-i bus technology and its application, Tenth AS-i bus auxiliary unit Wang AS-i can be viewed as an application field in it can support System components to users of all network connections. The following will Although not a network introduces some important components, but it is useful to single Yuan: power supply unit, repeater, address writing unit, grounding fault monitoring Is an overvoltage protector and monitor. 1 special power supply The power supply voltage range of 29.5VDC to 31.6VDC, with IEC The protection of low voltage (PELV) standard [IEC 64]. for fixed The specified voltage range, so in considering from machine chip IC AS-i and the cable voltage drop after (up to 3V), peripheral equipment still You can get 24V (10% + / - 15%) power supply, which is consistent with the. The allowable range of actuator power. Usually, the constant current power supply provided by the manufacturer. Now, the rated current is 2.2A to 8A series of products available With power must also be able to provide a large starting current and lasting Short circuit and overload protection function of the limiter. The power supply should be and AS-i network in all components, can be made by By the peak voltage 1kV and 2kV impact test. In details There are provisions of AS-i complete specification and EN50295. An important part of data decoupling circuit. It is also a power supply unit The current through inductor circuit and from the host machine to generate pulse conversion into electricity Pulse pressure. At the same time, it also ensures that the high frequency signal will not be short circuited or power supply Stop, and low frequency (less than 10kHz) signal fluctuations will be leveled, electric The pressure tip will disappear (sometimes it may also affect the communication should be done in). A AS-i network can switch ring 31 with 4 coils (170mA peak current) of the valve island, without communication error. Has formed a different function models of