CAD编号(国外英文资料).doc

CAD编号(国外英文资料) Do need to map was completed in construction of pile foundation, is the number one CAD before, or hand coded in the vegetable parchment again after drying system blueprint, pile number less words can but met mostly CFG pile Numbers compare or powder jet pile is trouble is dead, its difficult, actually CAD can be their own programming, according to their own needs suitable LSP program, after loading is very convenient for their use, put a rapid numbered steps pile says today. First open the CAD, the bottom line in all of the content is copied to the -- -- -- -- -- -- - tools AOTOLISP (S) - VISUAL LISP editor (V), documents, new files, and then save, save format is -- -- -- -- --. The LSP, such as automatic numbering. LSP, after tool - AOTOLISP (S) - load, load automatic numbering. LSP is ok. Use method: open autocad - tool - AutoLisp - - to find automatic number. LSP - - click load Then enter the cad drawing environment and enter the sb enter in the command line Specifies the location of the label (C)/lead (Y)/border (K)/text (W)/restore as the default setting (H)/exit (T)] : editor Please set the text height of the text style to 0 first C: set the initial value 0 natural number sequence (1, 2, 3...) 1 letter sequence (a, b, c... / a b c...) 2 / suffix natural sequence (a1, a2... / B1 B2... / (1)... 3 / suffix letter sequence (aa ab acc... / Ma Mb Mc... / (a)... Choose one of these 0/1/2/3: Y: set the lead to have no lead position parameter K: the border has no border radius W: set the height Angle and the size of the arrow H: to restore all the parameters to the initial value: Code type: 0 No. Initial value: 1 Lead: Y Frame: Y Border circle radius: auto Text height: 3.5 Text rotation Angle: 0 Number to lead: 1 Size of arrows: 2.5 Horizontal segment lead length: automatic Natural number prefix: no Natural number suffix: no Letter prefix: no Suffix: no When the border is automatically processed, the text to the border deviation factor: 7 (