材料问答题(国外英文资料).docVIP

材料问答题(国外英文资料) Simulation exam (1) Description of the experiment procedure of soil moisture content drying method. Answer: (1) take a representative sample, fine grained soil 15 ~ 30 g, 50 g sand soil, organic soil, sand and gravel for 1 ~ 2 kg in weighing box, immediately cover the lid, weigh and wet soil mass m, accurate to 0.01 g. (2) lift the lid, speak sample and weighing box into the oven, drying under the temperature 105 ~ 110 ℃ temperature. The drying time shall not be less than 8h for fine grain and shall not be less than 6h for sand. Mechanism to contain more than 5% of the earth, should be to control the temperature of 65 ~ 70 ℃ under the constant temperature drying, dry 12 ~ 15 h as well. (3) remove the samples from the drying and put them in the dryer. (usually only 0.5 to 1h). To cool and cover the lid, weigh the quality ms, accurate to 0.01 g. (4) calculating formula: w = (m-ms) \ msX100 % Two parallel tests are required to take the average of two parallel tests as the water content, and allow the parallel differential to meet the rules. 2. The sand sieve curve in grading range in the graph Ⅰ area, Ⅱ area, Ⅲ area shows what problem? What is the area beyond the three regions? Which area of sand should be used to make concrete? Why am I? A: engineering with sand is the sticky degree modulus in the sand of the range of 1.6 ~ 3.7, according to 0.63 ㎜ percentage over the accumulative total of mesh screen is divided into three gradation zone, if the gradation curve of concrete what completely in one of three zone area (details in 0.63 ㎜ mesh cumulative percentage screen), explain the grading conform to the requirements of the concrete with the grading of sand. If the grading of the sand is beyond the range of a (or a few) mesh, it is not suitable for use. Compound concrete priority select gradation meets the requirements of Ⅱ district-level with sand, Ⅱ sand area is composed of medium sand and part of the coarse sand, sand mixing with Ⅱ area of concrete mixt