加工中心线轨与硬轨(国外英语资料).docVIP

加工中心线轨与硬轨(国外英文资料) Code is an instruction in a numerical program. Generally referred to as the G directive. Code name - function Brief G00------ rapid positioning G01------ linear interpolation G02------ clockwise circular interpolation G03------ counterclockwise arc interpolation G04------ timed pause G05------ through the middle point arc interpolation G07------Z spline interpolation G08------ feed acceleration G09------ feed deceleration G20------ subroutine call G22------ radius size programming mode G220----- system operation interface G23------ diameter programming G230----- system operation interface G24------ subroutine end G25------ jump processing G26------ cycle machining G30------ magnification cancellation G31------ magnification definition G32------ equal pitch thread cutting, inch G33------ equal pitch thread cutting, metric G53, G500- sets the workpiece coordinate system to be canceled G54------ sets the workpiece coordinate system one G55------ sets the workpiece coordinate system two G56------ sets the workpiece coordinate system three G57------ sets the workpiece coordinate system four G58------ sets the workpiece coordinate system five G59------ sets the workpiece coordinate system six G60------ accurate path mode G64------ continuous path mode G70------ inch inch G71------ metric size mm G74------ return reference point (machine zero) G75------ returns the zero point of the programming coordinate G76------ returns the starting point of the programming coordinate G81------ external circle fixation cycle G331----- thread fixed cycle G90------ absolute size G91------ relative size G92------ prefabricated coordinates G94------ feed rate, feed per minute G95------ feed rate, per turn feed G00 - quick positioning Format: G00 X (U) __Z (W) __ Instructions: (1) the instruction moves the tool rapidly to the specified position according to the point control mode. The workpiece must not be removed during movement Processing. (2) all programming axes move at